Go to the back of the chair to measure the fabric area for height and width. Is it difficult to reupholster a chair?
Matthew haly, owner of the furniture joint, an upholstery studio in new york city, demonstrates how to reupholster a simple dining room chair.
How to reupholster a dining room chair seat and back. All of the chairs down to their frames. Each panel, seat cushion, frame, and fabric piece labeled with a piece of tape and a number matching the chair. Get the fabric & supplies you need at onlinefabricstore:
Old socks (optional) 60 grit sandpaper (optional) staple gun and staples; The extra fabric requires to be properly trimmed. Fold the fabric from the edges and around the seat and attach it with the staples.
Measure the inside of the back where your back rests, taking measurements from the top to the seat, as well as the width. Sandwich the seat back between the two pieces of fabric and pinch the fabric together where you want the final seam to be, and pinning together as you go. Remove the old seat and cushion;
Before you attach the new upholstery to your dining room chairs, henry says to consider fashioning new dust covers to them if the current ones are worn down. Sew the new upholstery and attach it accordingly to the chair but needs to be done from the back of the chair. Drape the new fabric over to the underside of the seat, trace the edge of the seat and cut, henry advises.
That’s the end of step 1 to reupholster dining room chairs. Old dining chair with padded seat, back and arm rests. Repeat the same steps to make a piece for the back, or you could just double the fabric and do one cut.
Attach the batting with foam and plywood; How to reupholster a dining room chair seat and back? Doing the job yourself takes a little time and effort, but you can produce a really professional looking result, save a heap of money, and bring a great vintage feature into your home.
At the end of this step you should have: Cut the foam in the shape; Upholstery fabric (mine was an art deco design bought online) upholstery staple remover and/or tack puller;
Be sure to measure it from its highest point to its lowest.