If you are looking for an axe throwing target for your home, you should use a thick piece of wood. Once, you get comfortable throwing, adjust your distance from the target until you consistently can stick your axe in.
Round tree slices also make good target materials, fir being the best choice, and letting the wood get soaked allows the axes to stick better.
How to make an axe throwing target. We shall be using our last 2×4 to create a solid third leg to hold up our target. The first layer should cover the osb or plywood walls. A great property of cottonwood is that when it soaks in moisture, the holes will seal up a little bit when the axes are pulled out.
We’re here to help you get some practice in at home with some instruction on building your own axe throwing target. Then the second layer is called the back which should be made of wood. Whichever ring your axe sticks into, that’s the score you get for that throw:
Make ach objective with 3 layers of wood. (these last two circles don’t need to be perfect.) you’re finished, and it’s time to start throwing some axes. Once, you get comfortable throwing, adjust your distance from the target until you consistently can stick your axe in.
To make an ax thrower’s ax will turn a circle of a certain diameter every two meters, which is about 6.5 feet. Additionally, it is important to use a suitable wood that allows your axe to penetrate the grain without unnecessarily dulling the blade. The material should be thick enough to withstand repeated throwing.
Build an axe throwing target to take your game to the next level. If playback doesn't begin shortly, try restarting. Look for wood that is free of dark spots and knots, especially towards the center of your target.
1, 2, 3, or 4 points.often the axe head will be buried in the wood touching two different scoring rings. Cut the 10 foot 2″ x 4″s in half, then cut the ends at a 45 degree angle to make two support boards. Pine and spruce are both good options.
If playback doesn't begin shortly, try restarting your device. The chances of the axe hitting a screw should be slim. However, throwing axes around your back yard is serious business;
Bring all your materials to the desired location of the target (it will be very heavy and difficult to move after assembly) cut 2″ x 10″ boards in half to create eight target boards. What this will allow us to do is wedge it between our two legs and be able to screw is against our axe throwing target so that it is flush, making it more stable. Watl axe throwing target dimensions target.
How to build an axe throwing target. I'll use deck screws to put the frame together and for the target boards will counter sink the screws in the corner of each board. How to make an axe throwing target!
When building your target, pay close attention to the direction of grain. You must use a large, sturdy target to keep the activity safe. By using our saw we will begin to cut the tip of our final piece in a 90 degree angle.
I'm going to use 2×6's for the frame, 5/8 plywood behind the target and 2 x10's for the target. There should be horizontal 2×10, 4 feet long, drilled into the wall, and well packaged to cover the entire space of the external lens. Axes should be at least 1/2″ thick.
If you want to become proficient throwing an axe, you must practice regularly. We have some outlines for the targets in our watl official rules you’ll find at any watl affiliated venue, and they can be found under section h.